A guide to DIY Glass Pool fencing on decking

A guide to DIY Glass Pool fencing on decking

DIY Glass Pool Fencing: The Construction

If you possess the capabilities and the know-how, or have spoken with someone who has and are still keen for taking the job on then you should shop around for a good supplier who retails at affordable prices. A lot of glass pool fence supply companies can proffer you products at a highly reduced price compared to the major hardware chains. You should choose one that is prepared to get in touch with you over the phone or one where you can grab the goods yourself. Any fragment of insider knowledge will help you on your way to installing your very own glass pool fence. This guide is not a step-by-step instructions for setting up fences because every type of fence will differ slightly in its build and every site will call for a different type of approach– that is why qualified pool fencing installers are usually required. However, that being said, if you do decide to take the DIY method, we want to provide you a handful of recommendations for several kinds of installs so you have a greater possibility of success.

DIY Glass Pool Fencing: Wooden Deck Applications

For the non-professionals, we only encourage installations to timber decking as this is among the simpler sorts of setups. This procedure is simpler as there is no requirement to take care of cement cutting for holes and as long as your deck is in good condition then there should be no problem with attaching a glass pool fence or glass balustrade to it. The most important thing to bear in mind with this kind of setup is that the glass is extremely weighty and in strong wind regions the glass screens can act as a sail and catch the wind. Therefore, we highly encourage that the joists beneath your deck be double in the spots where the base plated spigots will be mounted.

Though there are a considerable amount of spigot styles available, the majority of them will have a 100mm radius, or similar where the spigots need to be fixed to the timber. This is typically done with four holes in the base plate of your spigot and to make certain that each baton screw (recommended fixing) will be going into a substantial piece of timber. This is attained by utilizing double joist timber below where the spigots are placed. This will make sure your glass panels have a solid base and decrease the movement in the wind.

If you really want to discuss more about DIY Glass Pool Fencing and how to install different sorts of glass pool fencing or balustrade, or if you want to get a free quote on DIY materials, then please call us on 1300 937 902 or visit our Pool Fence website and DIY pool fence Website

Leave a Comment

Scroll to Top